Beko fridge repair in Runda.
If your Beko fridge or freezer in Runda has stopped working properly, we send a technician who repairs Beko fridges every week. Most jobs are finished in one visit. We cover Runda and nearby Gigiri, Muthaiga North, Rosslyn and Village Market.
About the fridges we repair.
Frost-free and no-frost fridge freezers, and chest freezers.
In Runda we see Beko fridges in homes, offices and shops. The usual jobs are below. Each one is a link to the full page on what causes it and how we fix it.
What we see most.
- Ice build-up
- Sensor faults
- Fan replacement
- Not cooling
- Freezer not freezing
- Gas refilling
Start from what the fridge is doing.
The pages below explain the usual causes and how we fix each one. No codes, no jargon.
Where else we come.
We cover Nairobi and the towns around it. If you are near Runda, we usually reach you the same day.
We repair every fridge brand sold in Kenya.
If your fridge in Runda is a different brand, pick it below. The visit, the price-first process and the same-day cover are the same.
Beko fridges and Runda homes.
Beko makes fridge freezers, chest freezers and a range of frost-free models that are common in Nairobi homes. Frost-free fridges use a fan and a defrost system to keep ice off the cooling parts, and many have a separate freezer section at the top or the bottom.
Runda is quiet, residential and spacious, with large family homes and well-equipped kitchens. Built-in and integrated fridges are common, and so are wine coolers and second fridges.
What we fix on Beko fridges.
Fan replacement
The fan moves cold air from the freezer into the fridge. A worn motor or a fan blocked with ice reduces the airflow and makes the fridge side warm. Replacing the fan is a single-part job, and it is often needed on older Beko units.
Door seal wear
A seal that no longer sticks to the cabinet lets warm, damp air in. That leads to frost, longer running and higher power use. A replacement seal is inexpensive, and fitting it correctly is what makes the repair last.
Ice build-up that comes back
A frost-free fridge should not grow ice on the back wall. When it does, the defrost heater, the sensor or the timer has failed, or warm air is getting in past the seal. We test the parts in order and replace the one that is faulty.
What we see in Runda kitchens.
Inverter board faults
High-end fridges use control boards that dislike surges. A dead board or erratic behaviour after a power cut is a common reason for calls.
Door seals on large doors
Heavy doors wear their seals and hinges. A new seal and a hinge adjustment keep cold in.
Care that prevents a repair.
Clear the drain hole at the back of the freezer every few months, so melted frost can run away. Wipe up any water under the drawers at once, since it can stain the floor and attract pests.
Have your built-in fridge cleaned and checked yearly, including the vents. Keep the wine cooler out of direct sun and away from heat sources.
Most Beko faults are sensors, fans or seals, which are repaired in a single visit. A frost-free fridge with a failed sealed system that is more than a decade old may be better replaced, and we give you the cost comparison before deciding.
How a Runda visit works.
Tell us what is wrong
Call or WhatsApp with what the fridge is doing and a photo of the model sticker inside.
We come to you
A technician visits your home or business and finds the fault.
You approve the price
You get the full price before any work starts. Nothing is done without your OK.
Cold again
We repair it, test the temperature and show you what was fixed.
Questions people ask
Do you repair Beko fridges in Runda?
Yes. A technician from our team comes to your home in Runda, Nairobi and repairs the Beko fridge where it stands. Most repairs are finished in one visit.
How soon can you reach Runda?
Often the same day for Runda and nearby Gigiri. Call or WhatsApp 0703 543 656 early in the day and we tell you the earliest time a technician can reach you.
Are you the official Beko service centre?
No. We are independent fridge technicians, not affiliated with Beko. For a Beko fridge still under the manufacturer warranty, contact the shop or Beko first.
Do you have Beko fridge spare parts?
We source the right part for your model. Send a photo of the rating plate inside the fridge (brand, model number, gas type) before we come so we can check.
Good to know about your fridge.
What happens on a visit
You call or WhatsApp us with what the fridge is doing and a photo of the model sticker. We tell you when a technician can come and how the visit fee works. The technician arrives, listens to the fridge, measures the temperature in both sections and checks the obvious causes in order.
When the fault is found, you are told what it is, shown the worn part where possible and given the full price for parts and labour before anything is changed. Nothing is done without your agreement. If a part has to be ordered, we tell you how long it will take.
After the repair, the fridge is left running and checked to confirm it is pulling down to temperature. Before we leave, we explain what failed and how to avoid it next time. If the fridge is not worth repairing, we say so, and we can collect an old fridge for responsible recycling.
How a fridge actually keeps things cold
A fridge does not make cold. It moves heat. Inside the sealed pipework there is a refrigerant gas. The compressor squeezes the gas, which makes it hot, and the hot gas flows through the coil at the back or underneath, called the condenser, where it gives its heat to the room. The gas turns to a liquid, passes through a very thin tube that drops its pressure, and arrives in the cold coil inside the fridge, the evaporator, where it turns back to a gas and soaks up heat from the food. Then it returns to the compressor and the cycle repeats.
That is why the back of a fridge feels warm and why a fridge squeezed into a cabinet struggles. If the heat cannot leave, the cycle slows and the compressor runs for longer. It is also why gas does not get used up: it travels round in a closed loop. When a fridge is low on gas there is a leak, and the leak has to be found and sealed first.
In a no-frost fridge a fan blows air over the evaporator and into the compartments, and a small heater melts the frost off the coil a few times a day. Most cooling faults come from these supporting parts, the fan, the heater, the sensor and the board, long before the compressor itself fails.
Reading the rating plate inside your fridge
Almost every fridge has a sticker or metal plate inside, usually on a side wall or at the back of the fridge compartment. It tells a technician almost everything: the brand, the model number, the voltage and frequency, the type of gas the fridge uses and how much of it, and often the manufacturing date.
Take a clear photo of that plate before you call. With the model number we can check which thermostat, seal, fan or board fits, which saves time on the visit. The gas type matters too. Modern fridges often use R600a, a flammable gas used in small amounts, while older ones commonly use R134a. The two are not interchangeable, and a fridge must always be charged with the gas printed on its own plate.
If you cannot find the plate, look for a sticker behind the vegetable drawers, on the inside of the door frame or on the back of the cabinet. Send us whatever you can find and the brand, and we will help you identify the model.
Fridges and freezers we work on.
Beko fridge in Runda not right?
Call or WhatsApp with what the fridge is doing and a photo of the model sticker. We tell you when a technician can come.