LG fridge repair in Embakasi.
We repair LG fridges and freezers across Embakasi, Nairobi and the estates around it. You get a visit, a diagnosis and a clear price before any work starts. We cover Embakasi and nearby Fedha, Utawala, Pipeline and Nyayo Estate.
About the fridges we repair.
Linear and inverter compressor models, side-by-side and door-in-door fridges.
In Embakasi we see LG fridges in homes, offices and shops. The usual jobs are below. Each one is a link to the full page on what causes it and how we fix it.
What we see most.
- Cooling getting weaker over time
- Fan and defrost faults causing ice
- Board faults after surges
- Not cooling
- Freezer not freezing
- Gas refilling
Start from what the fridge is doing.
The pages below explain the usual causes and how we fix each one. No codes, no jargon.
Where else we come.
We cover Nairobi and the towns around it. If you are near Embakasi, we usually reach you the same day.
We repair every fridge brand sold in Kenya.
If your fridge in Embakasi is a different brand, pick it below. The visit, the price-first process and the same-day cover are the same.
LG fridges and Embakasi homes.
LG fridges in Kenya include inverter models with a linear compressor, side-by-side fridges, door-in-door models and double door fridges. A linear compressor moves a piston in a straight line rather than spinning a motor, which is quiet and efficient, but it relies on the control board to drive it smoothly.
Embakasi has many flats, family homes and small shops. Chest freezers and display fridges are common in the shops, and their owners cannot afford long downtime.
What we fix on LG fridges.
Fan and defrost faults causing ice
Ice on the back wall of the freezer means the defrost system is not clearing the frost. The usual causes are a defrost heater, a defrost sensor or a control that has stopped sending the signal. We test each part and replace the one that has failed.
Board faults after surges
After a storm or a power cut, a fridge may not start, may start and stop quickly, or may show error lights. The control board is a common casualty. We test the board and the compressor so we know whether the board can be repaired or needs replacing.
Noise from the compressor
A linear compressor makes a soft hum. A louder buzz, a rattle or a click that repeats every few minutes can mean the compressor is struggling to start, the mounts have loosened or a pipe is touching the cabinet. We listen to the fridge in operation before diagnosing.
What we see in Embakasi kitchens.
Home fridge not cooling
A blocked air channel, a stopped fan or a dirty condenser is more common than low gas.
Surge damage
Boards and start relays can be damaged by surges. We test and replace the failed part.
Care that prevents a repair.
Clean the condenser twice a year, and keep the area around the compressor free of dust and grease. Keep the door seal clean with warm water, because grease from food can stop it sealing properly.
Keep display fridges away from direct sun, clean the condenser monthly in a busy shop, and check seals weekly with a sheet of paper.
Most LG fridge faults are a fan, a sensor, a seal or a board, and those repair well. A fridge with a failed linear compressor and a cabinet that is otherwise in good shape can still be repaired if the part is available. We tell you the price and the options before any work starts.
How a Embakasi visit works.
Tell us what is wrong
Call or WhatsApp with what the fridge is doing and a photo of the model sticker inside.
We come to you
A technician visits your home or business and finds the fault.
You approve the price
You get the full price before any work starts. Nothing is done without your OK.
Cold again
We repair it, test the temperature and show you what was fixed.
Questions people ask
Do you repair LG fridges in Embakasi?
Yes. A technician from our team comes to your home in Embakasi, Nairobi and repairs the LG fridge where it stands. Most repairs are finished in one visit.
How soon can you reach Embakasi?
Often the same day for Embakasi and nearby Fedha. Call or WhatsApp 0703 543 656 early in the day and we tell you the earliest time a technician can reach you.
Are you the official LG service centre?
No. We are independent fridge technicians, not affiliated with LG. For a LG fridge still under the manufacturer warranty, contact the shop or LG first.
Do you have LG fridge spare parts?
We source the right part for your model. Send a photo of the rating plate inside the fridge (brand, model number, gas type) before we come so we can check.
Good to know about your fridge.
How a fridge actually keeps things cold
A fridge does not make cold. It moves heat. Inside the sealed pipework there is a refrigerant gas. The compressor squeezes the gas, which makes it hot, and the hot gas flows through the coil at the back or underneath, called the condenser, where it gives its heat to the room. The gas turns to a liquid, passes through a very thin tube that drops its pressure, and arrives in the cold coil inside the fridge, the evaporator, where it turns back to a gas and soaks up heat from the food. Then it returns to the compressor and the cycle repeats.
That is why the back of a fridge feels warm and why a fridge squeezed into a cabinet struggles. If the heat cannot leave, the cycle slows and the compressor runs for longer. It is also why gas does not get used up: it travels round in a closed loop. When a fridge is low on gas there is a leak, and the leak has to be found and sealed first.
In a no-frost fridge a fan blows air over the evaporator and into the compartments, and a small heater melts the frost off the coil a few times a day. Most cooling faults come from these supporting parts, the fan, the heater, the sensor and the board, long before the compressor itself fails.
Reading the rating plate inside your fridge
Almost every fridge has a sticker or metal plate inside, usually on a side wall or at the back of the fridge compartment. It tells a technician almost everything: the brand, the model number, the voltage and frequency, the type of gas the fridge uses and how much of it, and often the manufacturing date.
Take a clear photo of that plate before you call. With the model number we can check which thermostat, seal, fan or board fits, which saves time on the visit. The gas type matters too. Modern fridges often use R600a, a flammable gas used in small amounts, while older ones commonly use R134a. The two are not interchangeable, and a fridge must always be charged with the gas printed on its own plate.
If you cannot find the plate, look for a sticker behind the vegetable drawers, on the inside of the door frame or on the back of the cabinet. Send us whatever you can find and the brand, and we will help you identify the model.
Protecting a fridge from power cuts and surges
Power cuts and surges are hard on fridges. When the supply returns it can arrive with a spike that damages the control board or the parts that start the compressor. Inverter fridges are the most sensitive, because a board sits between the plug and the compressor.
A good voltage guard, also called a fridge guard, delays the power coming back for a few minutes and cuts it if the voltage is too high or too low. It costs far less than a board repair. Choose one rated for the fridge, plug the fridge into it directly and avoid sharing the socket with a heater or an iron.
After any outage, wait a few minutes before switching the fridge on if you do not have a guard. Keep the door closed during the cut. A full fridge holds its cold for several hours if it is not opened, and a full freezer holds it for longer. Do not keep switching the fridge off and on at the wall; it puts strain on the compressor.
Fridges and freezers we work on.
LG fridge in Embakasi not right?
Call or WhatsApp with what the fridge is doing and a photo of the model sticker. We tell you when a technician can come.