LG fridge repair in Limuru.
We repair LG fridges and freezers across Limuru, Kiambu and the estates around it. You get a visit, a diagnosis and a clear price before any work starts. We cover Limuru and nearby Tigoni, Ngecha, Rironi and Ndeiya.
About the fridges we repair.
Linear and inverter compressor models, side-by-side and door-in-door fridges.
In Limuru we see LG fridges in homes, offices and shops. The usual jobs are below. Each one is a link to the full page on what causes it and how we fix it.
What we see most.
- Cooling getting weaker over time
- Fan and defrost faults causing ice
- Board faults after surges
- Not cooling
- Freezer not freezing
- Gas refilling
Start from what the fridge is doing.
The pages below explain the usual causes and how we fix each one. No codes, no jargon.
Where else we come.
We cover Nairobi and the towns around it. If you are near Limuru, we usually reach you the same day.
We repair every fridge brand sold in Kenya.
If your fridge in Limuru is a different brand, pick it below. The visit, the price-first process and the same-day cover are the same.
LG fridges and Limuru homes.
LG fridges in Kenya include inverter models with a linear compressor, side-by-side fridges, door-in-door models and double door fridges. A linear compressor moves a piston in a straight line rather than spinning a motor, which is quiet and efficient, but it relies on the control board to drive it smoothly.
Limuru is hilly, with family homes, farms and small shops. The cooler air helps fridges run easier, but damp can still corrode connections and wear seals.
What we fix on LG fridges.
Cooling gets weaker over months
A fridge that cools less each month often has a dirty condenser, a fan that is slowing down, or a leaking gas circuit. We check the airflow and the fan first. Gas is only refilled after a leak has been found and sealed.
Fan and defrost faults causing ice
Ice on the back wall of the freezer means the defrost system is not clearing the frost. The usual causes are a defrost heater, a defrost sensor or a control that has stopped sending the signal. We test each part and replace the one that has failed.
Board faults after surges
After a storm or a power cut, a fridge may not start, may start and stop quickly, or may show error lights. The control board is a common casualty. We test the board and the compressor so we know whether the board can be repaired or needs replacing.
What we see in Limuru kitchens.
Fridge not cooling
We check the airflow, fan and condenser before looking at gas.
Corroded connections
Damp air corrodes plugs, boards and contacts. We clean or replace them and advise on keeping the fridge dry.
Care that prevents a repair.
Clean the condenser twice a year, and keep the area around the compressor free of dust and grease. Keep the door seal clean with warm water, because grease from food can stop it sealing properly.
Keep the fridge dry and ventilated, clean the coil and check the seal regularly.
Most LG fridge faults are a fan, a sensor, a seal or a board, and those repair well. A fridge with a failed linear compressor and a cabinet that is otherwise in good shape can still be repaired if the part is available. We tell you the price and the options before any work starts.
How a Limuru visit works.
Tell us what is wrong
Call or WhatsApp with what the fridge is doing and a photo of the model sticker inside.
We come to you
A technician visits your home or business and finds the fault.
You approve the price
You get the full price before any work starts. Nothing is done without your OK.
Cold again
We repair it, test the temperature and show you what was fixed.
Questions people ask
Do you repair LG fridges in Limuru?
Yes. A technician from our team comes to your home in Limuru, Kiambu and repairs the LG fridge where it stands. Most repairs are finished in one visit.
How soon can you reach Limuru?
Often the same day for Limuru and nearby Tigoni. Call or WhatsApp 0703 543 656 early in the day and we tell you the earliest time a technician can reach you.
Are you the official LG service centre?
No. We are independent fridge technicians, not affiliated with LG. For a LG fridge still under the manufacturer warranty, contact the shop or LG first.
Do you have LG fridge spare parts?
We source the right part for your model. Send a photo of the rating plate inside the fridge (brand, model number, gas type) before we come so we can check.
Good to know about your fridge.
Choosing a fridge technician you can trust
A good technician explains the fault before changing parts. They test, tell you what failed and why, and give you the price before work starts. They show you the old part if you ask. They are honest when a repair does not make sense.
Be wary of anyone who names a fault over the phone without seeing the fridge, who insists on a gas refill without finding a leak or who will not give a price until the work is done. Ask whether the visit fee is separate and what it covers.
It also helps if the technician works on fridges every day. Fridges are a sealed cooling system with their own tools, gases and habits, and a general handyman may not have the equipment to vacuum and charge a system properly.
Moving a fridge without damaging it
Whenever possible, keep a fridge upright. The compressor oil sits in a defined place, and laying the fridge down can let it run into the pipes. If a fridge has to travel on its side, let it stand upright for several hours before you switch it on again.
Empty it and defrost the freezer the day before, so no water leaks on the way out. Secure the doors with tape and protect the corners. Plan the route, because large fridges are heavy and awkward on stairs, so tell your movers the size and the floor.
Level the fridge in its new position, leave a gap behind and above it and wait a short time before switching it on. We also help with installation and relocation, including bringing in a new fridge and removing the old one.
Saving power with the fridge you already have
A fridge runs all day and every day, so small improvements add up. Set the fridge between about three and five degrees and the freezer at minus eighteen. Colder settings use more power without protecting the food any better.
Keep the condenser clean, leave air space around the fridge and keep it away from the cooker and direct sun. Check the door seal and do not leave the door open while you decide what to eat.
A full fridge holds its cold better than an empty one, so a few bottles of water on the shelves help in a fridge that is mostly empty. Do not overpack it, though, because the air must still move. If a fridge is very old and the compressor is struggling, a replacement may repay itself in power, and we will tell you honestly if that applies.
Inverter fridges explained
A traditional compressor switches fully on and fully off. An inverter compressor changes its speed to suit the cooling needed. It runs slowly most of the time, which is quieter and uses less power, and it speeds up when the fridge needs to cool down.
To do that it needs a control board, called the inverter board, that converts the power and drives the compressor. The board is the weak point, because it dislikes surges and heat. When a board fails, the compressor does not start, even though the compressor itself may be fine.
That is why we test the board, the wiring and the compressor separately. A board can sometimes be repaired and sometimes needs replacing with a matching part. A voltage guard and a clean condenser are the best protection for an inverter fridge.
Fridges and freezers we work on.
LG fridge in Limuru not right?
Call or WhatsApp with what the fridge is doing and a photo of the model sticker. We tell you when a technician can come.