LG fridge repair in Thika.
If your LG fridge or freezer in Thika has stopped working properly, we send a technician who repairs LG fridges every week. Most jobs are finished in one visit. We cover Thika and nearby Makongeni, Landless, Ngoingwa and Section 9.
About the fridges we repair.
Linear and inverter compressor models, side-by-side and door-in-door fridges.
In Thika we see LG fridges in homes, offices and shops. The usual jobs are below. Each one is a link to the full page on what causes it and how we fix it.
What we see most.
- Cooling getting weaker over time
- Fan and defrost faults causing ice
- Board faults after surges
- Not cooling
- Freezer not freezing
- Gas refilling
Start from what the fridge is doing.
The pages below explain the usual causes and how we fix each one. No codes, no jargon.
Where else we come.
We cover Nairobi and the towns around it. If you are near Thika, we usually reach you the same day.
We repair every fridge brand sold in Kenya.
If your fridge in Thika is a different brand, pick it below. The visit, the price-first process and the same-day cover are the same.
LG fridges and Thika homes.
LG fridges in Kenya include inverter models with a linear compressor, side-by-side fridges, door-in-door models and double door fridges. A linear compressor moves a piston in a straight line rather than spinning a motor, which is quiet and efficient, but it relies on the control board to drive it smoothly.
Thika is a busy town of homes, restaurants, shops and butcheries. Chest freezers and display fridges are everywhere, and when one fails the stock is at risk the same hour, so we treat these calls as urgent.
What we fix on LG fridges.
Fan and defrost faults causing ice
Ice on the back wall of the freezer means the defrost system is not clearing the frost. The usual causes are a defrost heater, a defrost sensor or a control that has stopped sending the signal. We test each part and replace the one that has failed.
Board faults after surges
After a storm or a power cut, a fridge may not start, may start and stop quickly, or may show error lights. The control board is a common casualty. We test the board and the compressor so we know whether the board can be repaired or needs replacing.
Noise from the compressor
A linear compressor makes a soft hum. A louder buzz, a rattle or a click that repeats every few minutes can mean the compressor is struggling to start, the mounts have loosened or a pipe is touching the cabinet. We listen to the fridge in operation before diagnosing.
What we see in Thika kitchens.
Compressor start problems
A compressor that hums without starting needs the start relay and overload tested. We explain the cost before any work starts.
Butchery and shop freezers losing cold
Heavy daily use wears lid seals and thermostats. A freezer that no longer reaches freezing needs the seal and thermostat checked first, then the gas circuit.
Care that prevents a repair.
Clean the condenser twice a year, and keep the area around the compressor free of dust and grease. Keep the door seal clean with warm water, because grease from food can stop it sealing properly.
In a shop, clean the condenser monthly, check seals weekly with a sheet of paper, and do not overpack the cooler. Cold air needs space to move.
Most LG fridge faults are a fan, a sensor, a seal or a board, and those repair well. A fridge with a failed linear compressor and a cabinet that is otherwise in good shape can still be repaired if the part is available. We tell you the price and the options before any work starts.
How a Thika visit works.
Tell us what is wrong
Call or WhatsApp with what the fridge is doing and a photo of the model sticker inside.
We come to you
A technician visits your home or business and finds the fault.
You approve the price
You get the full price before any work starts. Nothing is done without your OK.
Cold again
We repair it, test the temperature and show you what was fixed.
Questions people ask
Do you repair LG fridges in Thika?
Yes. A technician from our team comes to your home in Thika, Kiambu and repairs the LG fridge where it stands. Most repairs are finished in one visit.
How soon can you reach Thika?
Often the same day for Thika and nearby Makongeni. Call or WhatsApp 0703 543 656 early in the day and we tell you the earliest time a technician can reach you.
Are you the official LG service centre?
No. We are independent fridge technicians, not affiliated with LG. For a LG fridge still under the manufacturer warranty, contact the shop or LG first.
Do you have LG fridge spare parts?
We source the right part for your model. Send a photo of the rating plate inside the fridge (brand, model number, gas type) before we come so we can check.
Good to know about your fridge.
How to tell if a door seal needs replacing
The door seal, or gasket, keeps warm air out. Over time it hardens, cracks or loses its magnetic grip. A bad seal causes frost, water inside, longer running and a higher bill.
Try the paper test: close the door on a sheet of paper and pull it out. If it slides out with no resistance, the seal is not gripping there. Test several points around the door. Look for splits, hardened sections and mould along the folds.
Wiping the seal with warm soapy water sometimes restores the grip, because grease and sugar stop it sealing. If cleaning does not help, the seal needs replacing. A new seal must be fitted straight, and the door adjusted so it closes evenly, or the new seal will not fix the problem.
Choosing a fridge technician you can trust
A good technician explains the fault before changing parts. They test, tell you what failed and why, and give you the price before work starts. They show you the old part if you ask. They are honest when a repair does not make sense.
Be wary of anyone who names a fault over the phone without seeing the fridge, who insists on a gas refill without finding a leak or who will not give a price until the work is done. Ask whether the visit fee is separate and what it covers.
It also helps if the technician works on fridges every day. Fridges are a sealed cooling system with their own tools, gases and habits, and a general handyman may not have the equipment to vacuum and charge a system properly.
Moving a fridge without damaging it
Whenever possible, keep a fridge upright. The compressor oil sits in a defined place, and laying the fridge down can let it run into the pipes. If a fridge has to travel on its side, let it stand upright for several hours before you switch it on again.
Empty it and defrost the freezer the day before, so no water leaks on the way out. Secure the doors with tape and protect the corners. Plan the route, because large fridges are heavy and awkward on stairs, so tell your movers the size and the floor.
Level the fridge in its new position, leave a gap behind and above it and wait a short time before switching it on. We also help with installation and relocation, including bringing in a new fridge and removing the old one.
Saving power with the fridge you already have
A fridge runs all day and every day, so small improvements add up. Set the fridge between about three and five degrees and the freezer at minus eighteen. Colder settings use more power without protecting the food any better.
Keep the condenser clean, leave air space around the fridge and keep it away from the cooker and direct sun. Check the door seal and do not leave the door open while you decide what to eat.
A full fridge holds its cold better than an empty one, so a few bottles of water on the shelves help in a fridge that is mostly empty. Do not overpack it, though, because the air must still move. If a fridge is very old and the compressor is struggling, a replacement may repay itself in power, and we will tell you honestly if that applies.
Fridges and freezers we work on.
LG fridge in Thika not right?
Call or WhatsApp with what the fridge is doing and a photo of the model sticker. We tell you when a technician can come.