Mika fridge repair in Kilimani.
A Mika fridge is one of the more common fridges in Kilimani. When it stops cooling, our technicians come to your home in Kilimani, Nairobi and repair it on site. We cover Kilimani and nearby Kileleshwa, Hurlingham, Yaya and Valley Arcade.
About the fridges we repair.
Single and double door fridges and freezers, budget friendly.
In Kilimani we see Mika fridges in homes, offices and shops. The usual jobs are below. Each one is a link to the full page on what causes it and how we fix it.
What we see most.
- Thermostat faults
- Door seals
- Gas leaks
- Not cooling
- Freezer not freezing
- Gas refilling
Start from what the fridge is doing.
The pages below explain the usual causes and how we fix each one. No codes, no jargon.
Where else we come.
We cover Nairobi and the towns around it. If you are near Kilimani, we usually reach you the same day.
We repair every fridge brand sold in Kenya.
If your fridge in Kilimani is a different brand, pick it below. The visit, the price-first process and the same-day cover are the same.
Mika fridges and Kilimani homes.
Mika fridges are budget-friendly single and double door fridges and freezers. They are simple machines with a compressor, a thermostat and a gas circuit, and they are a common sight in bedsitters, offices and small kitchens across Nairobi.
Kilimani is dense with apartments, serviced flats and small offices. Many households have a compact fridge in a narrow kitchen, used heavily by several people. Doors are opened often, so seals and fans wear sooner than in a quiet household.
What we fix on Mika fridges.
Start relay and compressor clicks
A fridge that clicks and does not start usually has a failed start relay. The relay is inexpensive, and we check it matches the compressor before fitting. If the compressor has failed electrically, we explain the cost before doing anything.
Freezer not freezing
A single door fridge with an ice box, or a small freezer, can lose its cold through a seal or a thermostat fault. We check those first and then look at the gas if the cold does not come back.
Thermostat faults
A thermostat that stops responding means the compressor either runs all the time or does not run at all. We test the thermostat and replace it if it does not switch correctly. It is a small part and the fridge should cool to the setting after the repair.
What we see in Kilimani kitchens.
Fan that is slowing down
The fan that moves cold air from the freezer into the fridge wears out over time. When it slows or stops, the fridge side warms while the freezer stays cold.
Ice build-up at the back
Ice on the back wall of the freezer means the defrost system is not clearing frost. The heater, sensor or timer is the usual cause.
Care that prevents a repair.
Clean the condenser at the back every few months. On budget fridges, dust reduces cooling more than most owners expect. A quick brush with the fridge unplugged makes a real difference.
In a flat with limited ventilation, leave a hand-width gap behind the fridge and clean the coil every few months. Keep the fridge away from the cooker if the layout allows.
Mika repairs are often very affordable, so the sensible choice is usually to repair. If the cabinet is damaged, the compressor has failed or the fridge is old and uses a lot of power, replacing it may make more sense. We give you the numbers first.
How a Kilimani visit works.
Tell us what is wrong
Call or WhatsApp with what the fridge is doing and a photo of the model sticker inside.
We come to you
A technician visits your home or business and finds the fault.
You approve the price
You get the full price before any work starts. Nothing is done without your OK.
Cold again
We repair it, test the temperature and show you what was fixed.
Questions people ask
Do you repair Mika fridges in Kilimani?
Yes. A technician from our team comes to your home in Kilimani, Nairobi and repairs the Mika fridge where it stands. Most repairs are finished in one visit.
How soon can you reach Kilimani?
Often the same day for Kilimani and nearby Kileleshwa. Call or WhatsApp 0703 543 656 early in the day and we tell you the earliest time a technician can reach you.
Are you the official Mika service centre?
No. We are independent fridge technicians, not affiliated with Mika. For a Mika fridge still under the manufacturer warranty, contact the shop or Mika first.
Do you have Mika fridge spare parts?
We source the right part for your model. Send a photo of the rating plate inside the fridge (brand, model number, gas type) before we come so we can check.
Good to know about your fridge.
How a fridge actually keeps things cold
A fridge does not make cold. It moves heat. Inside the sealed pipework there is a refrigerant gas. The compressor squeezes the gas, which makes it hot, and the hot gas flows through the coil at the back or underneath, called the condenser, where it gives its heat to the room. The gas turns to a liquid, passes through a very thin tube that drops its pressure, and arrives in the cold coil inside the fridge, the evaporator, where it turns back to a gas and soaks up heat from the food. Then it returns to the compressor and the cycle repeats.
That is why the back of a fridge feels warm and why a fridge squeezed into a cabinet struggles. If the heat cannot leave, the cycle slows and the compressor runs for longer. It is also why gas does not get used up: it travels round in a closed loop. When a fridge is low on gas there is a leak, and the leak has to be found and sealed first.
In a no-frost fridge a fan blows air over the evaporator and into the compartments, and a small heater melts the frost off the coil a few times a day. Most cooling faults come from these supporting parts, the fan, the heater, the sensor and the board, long before the compressor itself fails.
Reading the rating plate inside your fridge
Almost every fridge has a sticker or metal plate inside, usually on a side wall or at the back of the fridge compartment. It tells a technician almost everything: the brand, the model number, the voltage and frequency, the type of gas the fridge uses and how much of it, and often the manufacturing date.
Take a clear photo of that plate before you call. With the model number we can check which thermostat, seal, fan or board fits, which saves time on the visit. The gas type matters too. Modern fridges often use R600a, a flammable gas used in small amounts, while older ones commonly use R134a. The two are not interchangeable, and a fridge must always be charged with the gas printed on its own plate.
If you cannot find the plate, look for a sticker behind the vegetable drawers, on the inside of the door frame or on the back of the cabinet. Send us whatever you can find and the brand, and we will help you identify the model.
Protecting a fridge from power cuts and surges
Power cuts and surges are hard on fridges. When the supply returns it can arrive with a spike that damages the control board or the parts that start the compressor. Inverter fridges are the most sensitive, because a board sits between the plug and the compressor.
A good voltage guard, also called a fridge guard, delays the power coming back for a few minutes and cuts it if the voltage is too high or too low. It costs far less than a board repair. Choose one rated for the fridge, plug the fridge into it directly and avoid sharing the socket with a heater or an iron.
After any outage, wait a few minutes before switching the fridge on if you do not have a guard. Keep the door closed during the cut. A full fridge holds its cold for several hours if it is not opened, and a full freezer holds it for longer. Do not keep switching the fridge off and on at the wall; it puts strain on the compressor.
Fridges and freezers we work on.
Mika fridge in Kilimani not right?
Call or WhatsApp with what the fridge is doing and a photo of the model sticker. We tell you when a technician can come.