Mika fridge repair in Githurai.
We repair Mika fridges and freezers across Githurai, Kiambu and the estates around it. You get a visit, a diagnosis and a clear price before any work starts. We cover Githurai and nearby Githurai 44, Githurai 45, Kahawa Sukari and Kahawa Wendani.
About the fridges we repair.
Single and double door fridges and freezers, budget friendly.
In Githurai we see Mika fridges in homes, offices and shops. The usual jobs are below. Each one is a link to the full page on what causes it and how we fix it.
What we see most.
- Thermostat faults
- Door seals
- Gas leaks
- Not cooling
- Freezer not freezing
- Gas refilling
Start from what the fridge is doing.
The pages below explain the usual causes and how we fix each one. No codes, no jargon.
Where else we come.
We cover Nairobi and the towns around it. If you are near Githurai, we usually reach you the same day.
We repair every fridge brand sold in Kenya.
If your fridge in Githurai is a different brand, pick it below. The visit, the price-first process and the same-day cover are the same.
Mika fridges and Githurai homes.
Mika fridges are budget-friendly single and double door fridges and freezers. They are simple machines with a compressor, a thermostat and a gas circuit, and they are a common sight in bedsitters, offices and small kitchens across Nairobi.
Githurai is a busy residential area with many flats and small shops. Fridges are used hard, and power surges are a regular cause of board and relay failures.
What we fix on Mika fridges.
Thermostat faults
A thermostat that stops responding means the compressor either runs all the time or does not run at all. We test the thermostat and replace it if it does not switch correctly. It is a small part and the fridge should cool to the setting after the repair.
Door seals
A worn seal lets warm air in and the fridge runs longer than it should. Close the door on a sheet of paper to check. Replacing the seal and adjusting the door is a quick job that cuts power use and stops frost.
Gas leaks
A fridge that runs without getting cold is often low on gas through a leak. The leak is usually at a joint or in a pipe that has rubbed. We find and seal the leak, vacuum the system and charge the correct gas. We never refill without a repair.
What we see in Githurai kitchens.
Worn door seals
Heavy use wears seals. A new seal stops the frost and the wasted power.
Water leaks
A blocked drain or a loose line. We find where the water starts and fix it.
Care that prevents a repair.
Clean the condenser at the back every few months. On budget fridges, dust reduces cooling more than most owners expect. A quick brush with the fridge unplugged makes a real difference.
Use a voltage guard, keep the coil clean and check the seal with a sheet of paper.
Mika repairs are often very affordable, so the sensible choice is usually to repair. If the cabinet is damaged, the compressor has failed or the fridge is old and uses a lot of power, replacing it may make more sense. We give you the numbers first.
How a Githurai visit works.
Tell us what is wrong
Call or WhatsApp with what the fridge is doing and a photo of the model sticker inside.
We come to you
A technician visits your home or business and finds the fault.
You approve the price
You get the full price before any work starts. Nothing is done without your OK.
Cold again
We repair it, test the temperature and show you what was fixed.
Questions people ask
Do you repair Mika fridges in Githurai?
Yes. A technician from our team comes to your home in Githurai, Kiambu and repairs the Mika fridge where it stands. Most repairs are finished in one visit.
How soon can you reach Githurai?
Often the same day for Githurai and nearby Githurai 44. Call or WhatsApp 0703 543 656 early in the day and we tell you the earliest time a technician can reach you.
Are you the official Mika service centre?
No. We are independent fridge technicians, not affiliated with Mika. For a Mika fridge still under the manufacturer warranty, contact the shop or Mika first.
Do you have Mika fridge spare parts?
We source the right part for your model. Send a photo of the rating plate inside the fridge (brand, model number, gas type) before we come so we can check.
Good to know about your fridge.
Reading the rating plate inside your fridge
Almost every fridge has a sticker or metal plate inside, usually on a side wall or at the back of the fridge compartment. It tells a technician almost everything: the brand, the model number, the voltage and frequency, the type of gas the fridge uses and how much of it, and often the manufacturing date.
Take a clear photo of that plate before you call. With the model number we can check which thermostat, seal, fan or board fits, which saves time on the visit. The gas type matters too. Modern fridges often use R600a, a flammable gas used in small amounts, while older ones commonly use R134a. The two are not interchangeable, and a fridge must always be charged with the gas printed on its own plate.
If you cannot find the plate, look for a sticker behind the vegetable drawers, on the inside of the door frame or on the back of the cabinet. Send us whatever you can find and the brand, and we will help you identify the model.
Protecting a fridge from power cuts and surges
Power cuts and surges are hard on fridges. When the supply returns it can arrive with a spike that damages the control board or the parts that start the compressor. Inverter fridges are the most sensitive, because a board sits between the plug and the compressor.
A good voltage guard, also called a fridge guard, delays the power coming back for a few minutes and cuts it if the voltage is too high or too low. It costs far less than a board repair. Choose one rated for the fridge, plug the fridge into it directly and avoid sharing the socket with a heater or an iron.
After any outage, wait a few minutes before switching the fridge on if you do not have a guard. Keep the door closed during the cut. A full fridge holds its cold for several hours if it is not opened, and a full freezer holds it for longer. Do not keep switching the fridge off and on at the wall; it puts strain on the compressor.
Food safety when a fridge stops cooling
Bacteria multiply quickly above about five degrees. If the fridge side is warm, move milk, meat, fish and cooked food to the freezer or a cool box with ice, and keep the door closed as much as you can. If the freezer is still frozen, do not open it more than you need to.
As a rule of thumb, fresh meat, fish, dairy and cooked leftovers should not stay in a warm fridge for more than a few hours. Food that has thawed and warmed should not be refrozen if it has been warm for long. When in doubt, throw it out: a repair is cheaper than being ill.
Medicines that need refrigeration should be moved to a cool box and kept as cold as the label asks. If you are not sure whether something is still safe, check the instructions on the packaging or ask a pharmacist.
Why gas is rarely the first thing we check
Many people ask for a gas refill as soon as a fridge stops cooling. In practice, a fridge uses no gas. It circulates the same sealed charge for its whole life. If the charge is low, the fridge has a leak, and a refill without finding the leak means paying again in a few weeks.
Most cooling faults are something else: a blocked air channel, a stopped fan, a dirty condenser, a failed defrost heater, a worn door seal, a start relay, a thermostat or a board. These are found with a few tests, and they are usually cheaper to put right than a gas job.
When the tests point to a leak, we find it first, usually at a joint, a pipe that has rubbed or a corroded coil, repair it, pull a vacuum to remove air and moisture and then charge the exact gas the fridge was built for, by weight. That is the only way a gas job lasts.
Fridges and freezers we work on.
Mika fridge in Githurai not right?
Call or WhatsApp with what the fridge is doing and a photo of the model sticker. We tell you when a technician can come.